View LACP7P-JXKX-24_3834239.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

la cp7p, lr cp7p, ly cp7p oslon ssl ceramic package - 80 radiation pattern lead (pb) free product - rohs compliant released 2011-07-25 1 besondere merkmale ? geh?usetyp: smd keramik geh?use mit silikonverguss und linse ? typischer lichtstrom: 60 lm (rot); 74 lm (amber); 55 lm (gelb) bei 400 ma und bis zu 132 lm (rot); 162 lm (amber); 106 lm (gelb) bei 1 a ? besonderheit des bauteils: kompakte lichtquelle fr platzsparende designs ? wellenl?nge: 625 nm (rot), 617 nm (amber), 590 nm (gelb) ? abstrahlwinkel: 80 ? technologie: dnnfilm ingaalp ? typischer optischer wirkungsgrad: 79 lm/w (rot), 95 lm/w (amber), 68 lm/w (gelb) bei 100 ma ? gruppierungsparameter: lichtstrom, wellenl?nge ? l?tmethode: reflow l?ten ? vorbehandlung: nach jedec level 2 ? gurtung: 12-mm gurt mit 600/rolle, ?180 mm ? esd-festigkeit: esd-sicher bis 8 kv nach jesd22-a114-d ? erweiterte korrosionsfestigkeit: details siehe seite 13 anwendungen ? architekturbeleuchtung ? bhnen- und effekt-beleuchtung ? ladenbeleuchtung ? farbver?nderliche lichtquellen features ? package: smd ceramic package with silicon resin with lens ? typical luminous flux: 60 lm (red); 74 lm (amber); 55 lm (yellow) at 400 ma and up 132 lm(rot); 162 lm (amber); 106 lm (yellow) at 1 a ? feature of the device: small size high-flux led for slim designs ? wavelength: 625 nm (red), 617 nm (amber), 590 nm (yellow) ? viewing angle: 80 ? technology: thinfilm ingaalp ? typical optical efficiency: 79 lm/w (red), 95 lm/w (amber), 68 lm/w (yellow) at 100 ma ? grouping parameter: luminous flux, wavelength ? soldering methods: reflow soldering ? preconditioning: acc. to jedec level 2 ? taping: 12-mm tape with 600/reel, ?180 mm ? esd-withstand voltage: up to 8 kv acc. to jesd22-a114-d ? superior corrosion robustness: details see page 13 applications ? architectural lighting ? stage and entertainment lighting ? retail and shop lighting ? color changing fixtures
2011-07-25 2 released la cp7p, lr cp7p, ly cp7p anm.: die oben genannten typbezeichnungen umfassen d ie bestellbaren selektionen. diese bestehen aus wen igen helligkeitsgruppen (siehe seite 5 fr n?here informationen). es wird nur eine einzig e helligkeitsgruppe pro gurt geliefert. z.b.: la cp7p - jxkx - 24 bedeutet, dass auf dem gurt nur eine der helligk eitsgruppen jx, jy, jz oder kx enthalten ist. um die liefersicherheit zu gew?hrleisten, k?nnen ei nzelne helligkeitsgruppen nicht bestellt werden. gleiches gilt fr die farben, bei denen wellenl?nge ngruppen gemessen und gruppiert werden. pro gurt wi rd nur eine wellenl?ngengruppe geliefert. z.b.: la cp7 p-jxkx -24 bedeutet, dass auf dem gurt nur eine der wellenl?ngengruppen -2, -3, oder -4 enthalten ist ( siehe seite 5 fr n?here information). um die liefersicherheit zu gew?hrleisten, k?nnen ei nzelne wellenl?ngengruppen nicht bestellt werden. note: the above type numbers represent the order gro ups which include only a few brightness groups (see page 5 for explanation). only one group will be shipped o n each reel (there will be no mixing of two groups on each reel). e.g.la cp7p - jxkx -24 means that only one group jx, jy, jz or kx will be shippable for any one reel. in order to ensure availability, single brightness groups will not be orderable. in a similar manner for colors where wavelength gro ups are measured and binned, single wavelength grou ps will be shipped on any one reel. e.g. la cp7p-jxkx -24 means that only 1 wavelength group -2, -3 or -4 w ill be shippable. in order to ensure availability, sing le wavelength groups will not be orderable (see page 5 for explanation). bestellinformation ordering information typ type emissions- farbe color of emission lichtstrom 1) seite 20 luminous flux 1) page 20 i f = 400 ma f v (lm) lichtst?rke 2) seite 20 luminous intensity 2) page 20 i f = 400 ma i v (cd) bestellnummer ordering code la cp7p-jxkx-24 amber 45.0 ... 82.0 36 (typ.) q65110a90 67 lr cp7p-hzkx-1 red 39.0 ... 82.0 34 (typ.) q65111a0345 ly cp7p-hzjz-36 yellow 39.0 ... 71.0 31 (typ.) q65111 a0346
released la cp7p, lr cp7p, ly cp7p 2011-07-25 3 grenzwerte maximum ratings bezeichnung parameter symbol symbol wert value einheit unit betriebstemperatur operating temperature range t op C 40 + 110 c lagertemperatur storage temperature range t stg C 40 + 110 c sperrschichttemperatur junction temperature t j 125 c durchlassstrom (min.) forward current (max.) ( t s =25c) i f i f 100 1000 ma ma sto?strom surge current t 50 ms, d = 0.016, t s =25c i fm 2000 ma sperrspannung reverse voltage ( t s =25c) v r not designed for reverse operation v
2011-07-25 4 released la cp7p, lr cp7p, ly cp7p kennwerte characteristics ( t s = 25 c) bezeichnung parameter symbol symbol werte values einheit unit red amber yellow wellenl?nge des emittierten lichtes (typ.) wavelength at peak emission i f = 400 ma l peak 632 624 597 nm dominantwellenl?nge 5) seite 15 dominant wavelength 5) page 15 i f = 400 ma l dom 620 625 632 612 617* 624 583 590* 595 nm spektrale bandbreite bei 50 % i rel max (typ.) spectral bandwidth at 50 % i rel max i f = 400 ma dl 18 18 18 nm abstrahlwinkel bei 50 % i v (vollwinkel) (typ.) viewing angle at 50 % i v 2 j 80 80 80 grad deg. durchlassspannung 4) seite 20 ) (min.) forward voltage 4) page 20 (typ.) i f = 400 ma (max.) v f v f v f 2.0 2.2 2.6 2.0 2.25 2.6 2.0 2.3 2.6 v v v sperrstrom reverse current not designed for reverse operation w?rmewiderstand thermal resistance sperrschicht/l?tpad (typ.) junction/solder point (max.) r th js r th js 7 9.4** 7 9.4** 7 9.4** k/w k/w * einzelgruppen siehe seite 5 individual groups on page 5 **r th (max) basiert auf statistischen werten r th (max) is based on statistic values
released la cp7p, lr cp7p, ly cp7p 2011-07-25 5 wellenl?ngengruppen (dominantwellenl?nge) 3) seite 20 wavelength groups (dominant wavelength) 3) page 20 ) gruppe group amber amber gelb yellow einheit unit min. max. min. max. 2 612 616 nm 3 616 620 583 586 nm 4 620 624 586 589 nm 5 589 592 nm 6 592 595 nm helligkeits-gruppierungsschema brightness groups helligkeitsgruppe brightness group lichtstrom 1) seite 20 luminous flux 1) page 20 f v (lm) lichtst?rke 2) seite 20 luminous intensity 2) page 20 i v (cd) hz jx jy jz kx 39.0 ... 45.0 45.0 ... 52.0 52.0 ... 61.0 61.0 ... 71.0 71.0 ... 82.0 24.0 (typ.) 27.0 (typ.) 32.0 (typ.) 37.0 (typ.) 43.0 (typ.) anm.: die standardlieferform von serientypen beinhaltet eine familiengruppe. diese besteht aus nur wenigen helligkeitsgruppen. einzelne helligkeitsgrup pen sind nicht bestellbar. note: the standard shipping format for serial types includes a family group of only a few individual brightness groups. individual brightness groups can not be ordered. gruppenbezeichnung auf etikett group name on label beispiel: jx-2 example: jx-2 helligkeitsgruppe brightness group wellenl?nge wavelength jx 2 anm.: in einer verpackungseinheit / gurt ist immer nur eine helligkeitsgruppe enthalten. note: no packing unit / tape ever contains more than one brightness group.
2011-07-25 6 released la cp7p, lr cp7p, ly cp7p relative spektrale emission 2) seite 20 relative spectral emission 2) page 20 v( l ) = spektrale augenempfindlichkeit / standard eye r esponse curve f rel = f ( l ); t s = 25 c; i f = 400 ma abstrahlcharakteristik 2) seite 20 radiation characteristic 2) page 20 i rel = f ( j ); t s = 25 c 40 0 400 20 60 80 100 % nm l ohl11701 v l 450 500 550 600 650 700 amber red yellow f rel ohl04325 0? 20? 40? 60? 80? 100? 120? 0.4 0.6 0.8 1.0 100? 90? 80? 70? 60? 50? 0? 10? 20? 30? 40? 0 0.2 0.4 0.6 0.8 1.0 j
released la cp7p, lr cp7p, ly cp7p 2011-07-25 7 durchlassstrom 2) seite 20 forward current 2) page 20 i f = f ( v f ); t s = 25 c; red durchlassstrom 2) seite 20 forward current 2) page 20 i f = f ( v f ); t s = 25 c; yellow durchlassstrom 2) seite 20 forward current 2) page 20 i f = f ( v f ); t s = 25 c; amber ohl04586 f i v ma 1.6 f v 1.8 2.0 2.2 2.4 2.6 2.8 200 400 600 800 1000 ohl04587 f i v ma 1.6 f v 200 400 600 800 1000 1.8 2.0 2.2 2.4 2.6 3.0 ohl04585 f i v ma 1.6 f v 200 400 600 800 1000 1.8 2.0 2.2 2.4 2.6 3.0
released la cp7p, lr cp7p, ly cp7p 2011-07-25 8 relativer lichtstrom 2) seite 20 relative luminous flux 2) page 20 f v / f v (400 ma) = f ( i f ); t s = 25 c; red relativer lichtstrom 2) seite 20 relative luminous flux 2) page 20 f v / f v (400 ma) = f ( i f ); t s = 25 c; yellow relativer lichtstrom 2) seite 20 relative luminous flux 2) page 20 f v / f v (400 ma) = f ( i f ); t s = 25 c; amber ohl04415 i f f (400 ma) v v f 0 0 ma 0.5 1.0 1.5 2.0 2.5 200 400 600 1000 ohl04416 i f f (400 ma) v v f 0 0 ma 0.5 1.0 1.5 2.0 2.5 200 400 600 1000 ohl04414 i f f (400 ma) v v f 0 0 ma 0.5 1.0 1.5 2.0 2.5 200 400 600 1000
released la cp7p, lr cp7p, ly cp7p 2011-07-25 9 relative spannung 2) seite 20 relative voltage 2) page 20 d v f = v f - v f (25 c) = f ( t j ); i f = 400 ma; red, amber relative spannung 2) seite 20 relative voltage 2) page 20 d v f = v f - v f (25 c) = f ( t j ); i f = 400 ma; yellow -40 -0.15 ?c t j ohl04417 v f v d -20 0 20 40 60 80 120 -0.10 -0.05 0 0.05 0.10 0.15 0.25 -40 -0.15 ?c t j ohl04418 v f v d -20 0 20 40 60 80 120 -0.10 -0.05 0 0.05 0.10 0.20
released la cp7p, lr cp7p, ly cp7p 2011-07-25 10 relativer lichtstrom 2) seite 20 relative luminous flux 2) page 20 f v / f v (25 c)= f ( t j ); i f = 400 ma; red relativer lichtstrom 2) seite 20 relative luminous flux 2) page 20 f v / f v (25 c)= f ( t j ); i f = 400 ma; yellow relativer lichtstrom 2) seite 20 relative luminous flux 2) page 20 f v / f v (25 c)= f ( t j ); i f = 400 ma; amber ohl14420 -40 ?c j t -20 0 20 40 60 80 120 0 v v (25 ?c) f f 0.2 0.4 0.6 0.8 1.0 1.2 1.6 ohl14421 -40 ?c j t -20 0 20 40 60 80 120 0 v v (25 ?c) f f 0.5 1.0 1.5 2.0 2.5 ohl14419 -40 ?c j t -20 0 20 40 60 80 120 0 v v (25 ?c) f f 0.2 0.4 0.6 0.8 1.0 1.2 1.6
released la cp7p, lr cp7p, ly cp7p 2011-07-25 11 dominante wellenl?nge 2) seite 20 dominant wavelength 2) page 20 l dom = f ( t j ); i f = 400 ma; red dominante wellenl?nge 2) seite 20 dominant wavelength 2) page 20 l dom = f ( t j ); i f = 400 ma; yellow dominante wellenl?nge 2) seite 20 dominant wavelength 2) page 20 l dom = f ( t j ); i f = 400 ma; amber ohl04423 -6 dl dom nm j t -40 20 0 -20 80 60 40 ?c 120 -4 -2 0 2 4 6 8 ohl04424 -10 dl dom nm j t -40 20 0 -20 80 60 40 ?c 120 -5 0 5 10 15 ohl04422 -6 dl dom nm j t -40 20 0 -20 80 60 40 ?c 120 -4 -2 0 2 4 6 8
released la cp7p, lr cp7p, ly cp7p 2011-07-25 12 maximal zul?ssiger durchlassstrom max. permissible forward current i f = f ( t s ) zul?ssige impulsbelastbarkeit i f = f ( t p ) permissible pulse handling capability duty cycle d = parameter, t s = 25 c zul?ssige impulsbelastbarkeit i f = f ( t p ) permissible pulse handling capability duty cycle d = parameter, t s = 85 c 600 40 do not use current below 100 ma 20 0 400200 0 ?c 100 60 80 t s 140 ma 1200 800 i f ohl04649 0.8 -5 f i a t p s ohl04184 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 10 10 p t = d t t t p i f 0.010.33 0.5 0.2 0.1 0.02 d 0.005 = 0.05 1 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.1 0.8 -5 f i a t p s ohl04183 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 10 10 p t = d t t t p i f 0.010.33 0.5 0.2 0.1 0.02 d 0.005 = 0.05 1 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.1
released la cp7p, lr cp7p, ly cp7p 2011-07-25 13 ma?zeichnung 5) seite 20 package outlines 5) page 20 anm.: die led enth?lt ein esd-bauteil, das parallel zum chip geschalten ist. note: led is protected by esd device which is connecte d in parallel to led-chip. anm.: das geh?use ist fr ultraschallreinigung nicht geeignet note: package not suitalbe for ultra sonic cleaning korrosionsfestigkeit besser als en 60068-2-60 (meth od 4): mit erweitertem korrosionstest: 40c / 90%rh / 15pp m h 2 s / 336h corrosion robustness better than en 60068-2-60 (met hod 4): with enhanced corrosion test: 40c / 90%rh / 15ppm h 2 s / 336h kathodenkennung: markierung cathode mark: mark gewicht / approx. weight: 2.5 mg
2011-07-25 14 released la cp7p, lr cp7p, ly cp7p gurtung / polarit?t und lage 5) seite 20 verpackungseinheit 600/rolle, ?180 mm method of taping / polarity and orientation 5) page 20 packing unit 600/reel, ?180 mm
released la cp7p, lr cp7p, ly cp7p 2011-07-25 15 empfohlenes l?tpaddesign 5) seite 20 reflow l?ten recommended solder pad 5) page 20 reflow soldering anm.: weitere informationen finden sie in der applikat ionsschrift ?handling and processing details for ceramic leds note: for further information please refer to our ap plication note ?handling and processing details for ceramic leds
2011-07-25 16 released la cp7p, lr cp7p, ly cp7p l?tbedingungen vorbehandlung nach jedec level 2 soldering conditions preconditioning acc. to jedec level 2 reflow l?tprofil fr bleifreies l?ten (nach j-std-020d.01) reflow soldering profile for lead free soldering (acc. to j-std-020d.01) profile feature pb-free (snagcu) assembly recommendation max. ratings ramp-up rate to preheat* ) 25c to 150c 2 c / s 3 c / s time t s from t smin to t smax (150c to 200c 100 s min. 60 s max. 120 s ramp-up rate to peak* ) 180c to t p 2 c / s 3 c / s liquidus temperature t l 217c time t l above t l 80 s max. 100 s peak temperature t p 245 c max. 260 c time t p within 5c of the specified peak temperature t p - 5k 20 s min. 10 s max. 30 s ramp-down rate* t p to 100c 3 k / s 6 k / s maximum time 25c to peak temperature max. 8 min. all temperatures refer to the center of the package, measured on the top of th e component * slope calculation d t/ d t: d t max. 5 sec; fulfillment for the whole t-range 0 0 s oha04525 50 100 150 200 250 300 50 100 150 200 250 300 t t ?c s t t p t t p 240 ?c 217 ?c 245 ?c 25 ?c l
released la cp7p, lr cp7p, ly cp7p 2011-07-25 17 barcode-produkt-etikett (bpl) barcode-product-label (bpl) gurtverpackung tape and reel tape dimensions in mm (inch) w p 0 p 1 p 2 d 0 e f 4 0.1 (0.157 0.004) 8 0.1 (0.315 0.004) 2 0.05 (0.079 0.002) 1.5 + 0.1 (0.059 + 0.004) 1.75 0.1 (0.069 0.004) 5.5 0.05 (0.217 0.002) reel dimensions in mm (inch) a w n min w 1 w 2 max 180 (7) 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079) 18.4 (0.724) oha04563 (g) group: 1234567890 (1t) lot no: (9d) d/c: 1234 (x) prod no: 123456789 (6p) batch no: 1234567890 lx xxxx rohs compliant bin1: xx-xx-x-xxx-x ml 2 temp st 260 c r pack: r18 demy 022 b_r999_1880.1642 r 9999 (q)qty: semiconductors osram opto xx-xx-x-x d 0 2 p p 0 1 p w f e direction of unreeling n w 1 2 w a ohay0324 label gurtvorlauf:leader: trailer: gurtende: 13.0 direction of unreeling 0.25 160 mm 160 mm 400 mm 400 mm 12 + 0.3 C 0.1
2011-07-25 18 released la cp7p, lr cp7p, ly cp7p trockenverpackung und materialien dry packing process and materials anm.: feuchteempfindliche produkte sind verpackt in einem trockenbeutel zusammen mit einem trockenmitte l und einer feuchteindikatorkarte bezglich trockenverpackung finden sie weitere hinw eise im internet und in unserem short form catalog im kapitel gurtung und verpackung unter dem punkt t rockenverpackung. hier sind normenbezge, unter anderem ein auszug der jedec-norm, enthalten. note: moisture-sensitve product is packed in a dry b ag containing desiccant and a humidity card. regarding dry pack you will find further informatio n in the internet and in the short form catalog in chapter tape and reel under the topic dry pack. here yo u will also find the normative references like jede c. kartonverpackung und materialien transportation packing and materials dimensions of transportation box in mm (inch) breite / width l?nge / length h?he / height 200 5 (7,874 0,1968) 200 5 (7,874 0,1968) 30 5 (1,1811 0,1968) oha00539 osram moisture-sensitive label or print barcode label desiccant humidity indicator barcode label osram please check the hic immidiately after bag opening. discard if circles overrun. avoid metal contact. wet do not eat. comparatorcheck dot parts still adequately dry.examine units, if necessary examine units, if necessary 5% 15% 10% bake unitsbake units if wet, change desiccantif wet, humidity indicator mil-i-8835 if wet, moisture level 3 floor time 168 hours moisture level 6 floor time 6 hours a) humidity indicator card is > 10% when read at 23 ?c 5 ?c, or reflow, vapor-phase reflow, or equivalent processing (peak package 2. after this bag is opened, devices that will be subjected to infrared 1. shelf life in sealed bag: 24 months at < 40 ?c and < 90% relative humidity (rh). moisture level 5a at factory conditions of (if blank, seal date is identical with date code). a) mounted withinb) stored at body temp. 3. devices require baking, before mounting, if:bag seal date moisture level 1 moisture level 2 moisture level 2a 4. if baking is required, b) 2a or 2b is not met. date and time opened: reference ipc/jedec j-std-033 for bake procedure. floor time see below if blank, see bar code label floor time > 1 yearfloor time 1 year floor time 4 weeks 10% rh. _ < moisture level 4moisture level 5 ?c). opto semiconductors moisture sensitive this bag contains caution floor time 72 hoursfloor time 48 hours floor time 24 hours 30 ?c/60% rh. _ < level if blank, seebar code label oha02044 packvar: r077 additional text p-1+q-1 multi topled muster osram opto semiconductors(6p) batch no: (x) prod no: 1 0 (9d) d/c: 11 (1t) lot no: 210021998 123gh1234 0 24 5 (q)qty: 2000 0144 (g) group: 260 c rt 240 c r 3 220 c r ml bin3: bin2: q-1-20 bin1: p-1-20 lsy t676 22a temp st r18 demy packvar: r077 additional text p-1+q-1 multi topled muster osram opto semiconductors(6p) batch no: (x) prod no: 1 0 (9d) d/c: 11 (1t) lot no: 210021998 123gh1234 0 24 5 (q)qty: 2000 0144 (g) group: 260 c rt 240 c r 3 220 c r ml bin3: bin2: q-1-20 bin1: p-1-20 lsy t676 22a temp st r18 demy osram packingsealing label barcode label moisture level 3 floor time 168 hours moisture level 6 floor time 6 hours a) humidity indicator card is > 10% when read at 23 ?c 5 ?c, or reflow, vapor-phase reflow, or equivalent processing (peak package 2. after this bag is opened, devices that will be subjected to infrared 1. shelf life in sealed bag: 24 months at < 40 ?c and < 90% relative humidity (rh). moisture level 5a at factory conditions of (if blank, seal date is identical with date code). a) mounted withinb) stored at body temp. 3. devices require baking, before mounting, if:bag seal date moisture level 1 moisture level 2 moisture level 2a 4. if baking is required, b) 2a or 2b is not met. date and time opened: reference ipc/jedec j-std-033 for bake procedure. floor time see below if blank, see bar code label floor time > 1 yearfloor time 1 year floor time 4 weeks 10% rh. _ < moisture level 4moisture level 5 ?c). opto semiconductors moisture sensitive this bag contains caution floor time 72 hoursfloor time 48 hours floor time 24 hours 30 ?c/60% rh. _ < level if blank, seebar code label barcode label
released la cp7p, lr cp7p, ly cp7p 2011-07-25 19 wegen der streichung der led aus der iec 60825 erfo lgt die bewertung der augensicherheit nach dem stan dard iec 62471:2006("photobiological safety of lamps and lam p systems") im risikogruppensystem dieser cie- norm erfllen di e in diesem datenblatt angegebenen led die "exempt" - gruppe (die sich im "sichtbaren" spektralbereich auf eine expositionsda uer von 10000 s bezieht). unter realen umst?nden (f r expositionsdauer, augenpupille, betrachtungsabstand) geht damit von d iesen bauelementen keinerlei augengef?hrdung aus. grunds?tzlich sollte jedoch erw?hnt werden, dass in tensive lichtquellen durch ihre blendwirkung ein ho hes sekund?res gefahrenpotenzial besitzen. wie nach dem blick in andere helle lichtq uellen (z.b. autoscheinwerfer) auch, k?nnen tempor? r eingeschr?nktes sehverm?gen und nachbilder je nach situation zu irritationen, b el?stigungen, beeintr?chtigungen oder sogar unf?lle n fhren. due to the cancellation of the led from iec 60825, the evaluation of eye safety occurs according to th e standard iec 62471:2006 ("photobiological safety of lamps and lamp systems" ). within the risk grouping system of this cie standar d, the leds specified in this data sheet fall into the "exempt" group (relating to devices in the visible spectrum with an exposure time of 10 000 s). under real circumstances (for exposure time , eye pupils, observation distance), it is assumed that no endangerment to the eye exist s from these devices. as a matter of principle, however, it should be men tioned that intense light sources have a high secon dary exposure potential due to their blinding effect. as is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the s ituation. attention please! the information describes the type of component and shall not be considered as assured characteristics . terms of delivery and rights to change design reser ved. due to technical requirements components may c ontain dangerous substances. for information on the types in question please con tact our sales organization. if printed or downloaded, please find the latest ve rsion in the internet. packing please use the recycling operators known to you. we can also help you C get in touch with your nearest sales office. by agreement we will take packing material back, if it is sorted. you mu st bear the costs of transport. for packing materia l that is returned to us unsorted or which we are not obliged to accept, we shall have to invo ice you for any costs incurred. components used in life-support devices or systems must be expressly authorized for such purpose! critical components 7) page 20 may only be used in life-support devices or systems 8) page 20 with the express written approval of osram os. revision history: 2011-07-25 previous version: 2011-03-21 page subjects (major changes since last revision) date of change all preliminary data sheet created 2009-07-20 1, 12 jedec level updated 2009-09-15 10 approx. weight corrected 2009-09-25 1, 10 additional information 2010-02-26 all color red and yellow added / datasheet reworked 2010-06-16 19 eye safety information added 2010-08-03 1 typical luminous flux, optical efficiency updated 2010-08-19 19 eye safety information updated 2010-08-31 1 typical luminous flux, optical efficiency correcte d 2010-09-09 19 eye safety information corrected 2010-09-09 all final datasheet created 2010-10-28 1, 17 taping corrected 2011-03-21 12 max. permissible forward current updated 2011-03-21 15 note added 2011-03-21 17 reel dimension corrected 2011-07-25 patent list patent no. us 6 066 861 us 6 277 301 us 6 245 259
released la cp7p, lr cp7p, ly cp7p 2011-07-25 20 fu?noten: 1) helligkeitswerte werden w?hrend eines strompulses einer typischen dauer von 25 ms, mit einer internen reproduzierbarkeit von +/- 8 % und einer erweiterte n messunsicherheit von +/- 11 % gemessen (gem?? gum mit erweiterungsfaktor k = 3). 2) wegen der besonderen prozessbedingungen bei der herstellung von led k?nnen typische oder abgeleitet e technische parameter nur aufgrund statistischer werte wiedergegeben werden. diese stimmen nicht notwendigerweise mit den werten jedes einzelnen produktes berein, dessen werte sich von typischen und abgeleiteten werten oder typischen kennlinien unterscheiden k?nnen. falls erforderlich, z.b. aufgrund technischer verbesserungen, werden diese typischen werte ohne weitere ankndigung ge?ndert. 3) die dominante wellenl?nge wird w?hrend eines strompulses einer typischen dauer von 25 ms, mit einer internen reproduzierbarkeit von +/- 0,5 nm un d einer erweiterten messunsicherheit von +/- 1 nm gemessen (gem?? gum mit erweiterungsfaktor k = 3). 4) vorw?rtsspannungen werden w?hrend eines strompulses einer typischen dauer von 8 ms, mit einer internen reproduzierbarkeit von +/- 0,05 v un d einer erweiterten messunsicherheit von +/- 0,1 v gemessen (gem?? gum mit erweiterungsfaktor k=3). 5) ma?e werden wie folgt angegeben: mm (inch) 6) ein kritisches bauteil ist ein bauteil, das in lebenserhaltenden apparaten oder systemen eingesetzt wird und dessen defekt voraussichtlich z u einer fehlfunktion dieses lebenserhaltenden apparates oder systems fhren wird oder die sicherheit oder effektivit?t dieses apparates oder systems beeintr?chtigt. 7) lebenserhaltende apparate oder systeme sind fr (a) die implantierung in den menschlichen k?rper oder (b) fr die lebenserhaltung bestimmt. falls sie versagen, kann davon ausgegangen werden, dass die gesundheit und das leben des patienten in gefahr ist. published by osram opto semiconductors gmbh leibnizstrasse 4, d-93055 regensburg www.osram-os.com ? all rights reserved. remarks: 1) brightness values are measured during a current pulse of typical 25 ms, with an internal reproducib ility of +/- 8 % and an expanded uncertainty of +/- 11 % (acc. to gum with a coverage factor of k = 3). 2) due to the special conditions of the manufacturing processes of led, the typical data or calculated correlations of technical parameters can only refle ct statistical figures. these do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data a nd calculated correlations or the typical characterist ic line. if requested, e.g. because of technical improvements, these typ. data will be changed witho ut any further notice. 3) the dominant wavelength is measured at a current pulse of typical 25 ms, with an internal reproducib ility of +/- 0,5 nm and an expanded uncertainty of +/- 1 nm (acc. to gum with a coverage factor of k=3). 4) the forward voltage is measured during a current pulse of typical 8 ms, with an internal reproducibi lity of +/- 0,05 v and an expanded uncertainty of +/- 0,1 v (acc. to gum with a coverage factor of k=3). 5) dimensions are specified as follows: mm (inch). 6) a critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its saf ety or the effectiveness of that device or system. 7) life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human li fe. if they fail, it is reasonable to assume that the h ealth and the life of the user may be endangered.

▲Up To Search▲

Price & Availability of LACP7P-JXKX-24

	To Download LACP7P-JXKX-24 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .